Request a Consultation now...
You are here: Products » Level » Magnetostrictive Level Transmitters » ABB K-TEK AT100

ABB K-TEK AT100 Magnetostrictive Level Transmitter

 

ABB AT100
     
KC Controls HB series Ball Valves  ABB K-TEK AT100
The AT100 is Based Upon the Magnetostrictive Principle. The Sensing Tube Contains a Wire, which is Pulsed at Fixed Time Intervals and the Interaction of the Current Pulse with the Magnetic Field Created by the Magnetic Float. This Causes a Torsional Stress Wave to be Induced in the Wire. This Torsion Propagates Along the Wire at a Known Velocity from the Position of the Magnetic Float and Toward Both Ends of the Wire. A Patented Piezo-Magnetic Sensing Element Placed in the Transmitter Assembly Converts the Received Mechanical Torsion into an Electrical Return Pulse. The Microprocessor-Based Electronics Measures the Elapsed Time Between the Start and Return Pulses and Converts it into a 4-20 mA Output, which is Proportional to the Level Being Measured.

FEATURES:
  • SIL2 Certified IEC 61508*
  • High Accuracy: .01% of Full Scale
  • Superior Piezo Ceramic Sensor (Patent # 5,473,245)
  • Local Indication with LCD Display
  • Never Requires Re-Calibration: Set It & Forget It
  • Dual Compartment Housing with Separate Field Terminal Compartment
  • Loop Powered to 75’ (22M) Probe Length
  • Total and/or Interface Level Measurement
  • Pressure to 3000psig (207 bar), Std. 1800 psig (124.1 bar)
  • Temperature Range: -320 to 800º F (-196 to 427ºC) with options
  • Field Replaceable / Upgradable Electronics Module
  • Built In RFI / EMI Filter
  • Digital Communications


OPTIONS:

  • Two Level Indications
  • Temperature Indications
  • Foundation Fieldbus Output
  • Honeywell DE Output
  • Glass Viewing Window
  • 316L Stainless Steel Enclosure
  • 20 Point Strapping Table


For more information click on the pdf image above for full specifications, call KC Controls on 01293 538940 or send us an e-mail to sales@kccontrols.co.uk