You are here: Products » Hart & Wireless Communication » Hand-Held

Hand-Held


ABB DHH805.A HART Handheld Communicator

  • Suited for configuration and calibration of ABB and third party HART devices
  • Easy-to-read dot matrix graphic 6 lines display with backlight and contrast adjustment
  • Off-line mode for developing / reviewing configurations
  • Dedicated PC-tool for managing up to 200 device configurations and up to 1000 DDs

Click here to view the ABB DHH805.A HART Handheld Communicator...


ABB DHH801-MFC Communicator

  • The DHH801-MFC Communicator is a microprocessor based battery powered handheld terminal designed to configure and troubleshoot HART instruments.
  • All supported HART field devices can be configured, polled, and trimmed using the DHH801-MFC.
  • Up to 200 transmitter configurations can be stored in the permanent memory
  • It may be connected in any termination point of the loop, to interrogate the instrument either before or after installation.

Click here to view the ABB DHH801-MFC Communicator...


ABB DHH810-MFT Calibrator/Communicator

  • The DHH810-MFT Calibrator & Communicator is a microprocessor based battery powered handheld terminal designed to calibrate, configure, and troubleshoot HART instruments.
  • Designed for optimum convenience and usability, it’s ergonomic design makes the Mobility DHH810-MFT easy for field carrying and use.
  • Users can view up to four simultaneous measurements on the high resolution LCD or compare HART PV and AO values to corresponding values measured by the NIST traceable DHH810-MFT.
  • A voltage and current meter is integral to the base unit. All HART field devices can be configured, polled & trimmed using HART communications.

Click here to view the ABB DHH810-MFT Calibrator/Communicator...


If you have any queries you can call KC Controls on 01293 538940 or send us an e-mail to sales@kccontrols.co.uk