Request a Consultation now...
You are here: Products » Level » Speciality Level Measurement

Speciality Level Measurement


Click to view

ABB K-TEK Chutemaster

This microwave emits an average power density of less than 0.05 mW/ cm2. Therefore, there is no need for any warning signs, shielding or protection and it is regarded as totally safe. The microwave energy can pass through any non-conductive material such as plastics, ceramics, rock, rubber or glass, etc.

Click here to view our ABB K-TEK Chutemaster ...

 


Click to view

ABB K-TEK KM50

The KM50 is a magnetically-coupled, liquid level indicating device that provides an isolated means of determining the fluid level within a storage tank without exposing personnel to potentially harmful contact.

 Click here to view the ABB K-TEK KM50...

 


Click to view

ABB K-TEK KP

The operation of the ABB Rotary Paddle Switch centers around a low torque, slow speed (1 RPM) synchronous motor. The absence of dry material allows the motor to turn the paddle uninterrupted. When the unit senses the presence of dry material via the restricted rotation of the paddle, the reversing torque actuates the internal SPDT switches and alarms the unit. The hysteresis motor continues to run in a restricted or completely stalled state without damage or overheating.

Click here to view the ABB K-TEK KP...

 


Click to view

ABB K-TEK SLT

The SoliTrak™ is an electro-mechanic level measuring instrument for the continuous measuring of level in hoppers, silos or tanks. This top mounted system is used for monitoring the level in applications such as powders, small grain bulk materials or coarse grain bulk materials.

Click here to view the ABB K-TEK SLT...

 


Click to view

ABB K-TEK ST95

The ST95 is a High Quality Seal Fluid Supply Tank with Integral Magnetic Level Indication that is Used to Replace Conventional "Seal Pots" that use Glass Gauges to View the Seal Fluid Level. Since the Level Indicated by the ST95 is More Visible than with a Conventional Gauge Glass, it is Easier to Monitor Seal Performance.

Click here to view the ABB K-TEK ST95...



Click to view

Hycontrol Admittance Switches

  • Unaffected by material coating on the sensing probe
  • UnNo moving parts to wear out
  • Easy installation through a 1" BSP process fitting
  • High corrosion and chemical resistance as standard options

Click here to view the Hycontrol Admittance Switches...

 


Click to view

Rotary Paddle Switch

  • Adjustable Sensitivity settings for different materials.
  • Reduced Maintenance costs with '3 minute' motor replacement while still on the silo.
  • Rugged Cast Aluminium Housing for demanding environments.
  • Corrosion Resistant stainless steel paddle and shaft assembly.

Click here to view the Rotary Paddle Switch...

 


Click to view

Hycontrol Microsense Doppler Flow Switch

  • Non contact principle
  • High penetration and surface coating immunity
  • Simple installation and setup
  • Total safety for operations and site personnel
  • New doppeler detection principle

Click here to view the Hycontrol Microsense Doppler Flow Switch...


Click to view

Hycontrol Microwave Switch

  • Long Ranges
  • Non-invasive
  • Wide temperature range
  • For uses in: Granules, flakes, stones, sands, cement, fillers, liquids, pastes.

Click here to view the Hycontrol Microwave Switch...

 


Click to view

Hycontrol Conductivity Level Switch

  • Voltage between the probes 8v
  • Operating temperature from -10°C to 50°C
  • Sensitivity range from 2 to 20K
  • Max. cable length 800m, insulation 600V
  • Insulating resistance 100mΩ

Click here to view the Hycontrol Conductivity Level Switch...


Click to view

Hycontrol Hydostatic Pressure Transmitter

  • Flush diaphragm
  • Optional HART® communication
  • Stainless steel ball housing or aluminium die cast case
  • For the Food, Pharmaceutical, Process and petrochemical industries

Click here to view the Hycontrol Hydostatic Pressure Transmitter...

 


Click to view

Hycontrol Thruwall

  • Easy to install
  • Ideal for aggressive, toxic, pressurised and sterile applications as there is no contact with the product
  • Measurement is possible even with foam on liquid surface
  • Suitable for all hygienic applications

Click here to view the Hycontrol Thruwall...


Click to view
Mutec LevelCheck 350C
  • Reliable capacitive measuring principle
  • For all bulk materials
  • Adjustable sensitivity
  • Easy installation by compact constructions
  • Process connection by flange etc.

Click here to view the Mutec LevelCheck 350C...


If you have any queries you can call KC Controls on 01293 538940 or send us an e-mail to sales@kccontrols.co.uk