Component performance and reliability are paramount for any industrial application. Where a piece of equipment operates continuously, safely, and with minimal invasiveness, it offers a multitude of unquantifiable benefits upon its proprietary purpose Pressure...
Tube Bender
£1,000.00 £800.00
- High quality bending performance on stainless steel, and other hard tubing such as steel and titanium.
- Two stage design allows for in-place bending from 90° to 180° without ever crossing handles. Lock/unlock with a half turn rotation of the bending handle.
- Extra-long 16” (40 cm) handles increase leverage and roll dies in the bending form reduce force needed.
- Vice clamp built into bending form for extra stability
Related products
-
Sale!
Commercial Grade Tubing
Commercial Grade Tubing, various materials from European Sourced Mills, please contact us for sizes and availability
£1,000.00£800.00 -
Coning and Threading Machine
Parker Autoclave Engineer’s coning and threading machine used for medium and high pressure tubing end preparation. Used for on site installation, and larger size tubing. Ability to cone on one side and thread on the other this machine makes easy work of large jobs or jobs using larger size tubing which cannot be coned and threaded by hand.
- 1/2″ TEFC motor, capacitor start.
- Pop open die prevents thread damage, no reversing necessary on threading.
- Supplied with oil pump and reservoir.
- 220 volt units are CE marked.
- Optional reservoir heater for operation below 65°F.
- Stand mount with locking casters.
- Complete range of tooling available by separate order.
-
Coning and Threading Tools
Parker Autoclave Engineers manufactures a manual coning and threading tool for optimum performance with tubing sizes up to 9/16” (14.3 mm) outside diameter. These precision quality manual tools permit on-site end preparation for Parker Autoclave Engineers medium and high pressure tubing installations.
Included with all kits:
Coning Tool Assembly:
• Three Collets
• Collet Nut Wrench
• Three sets of Coning Blades (1/4″ to 9/16″)
• 3/32″ Coning Blade Allen Wrench (p/n 90256)
• Four spare Set Screws (p/n 90254)
• De-burring Tool (p/n 90257)
• One quart of Cutting Oil (p/n P-8784)
• Tool Box with trayThreading Tool parts include:
• 1/8″ Die Allen Wrench (p/n P-0285)
• Die Set Screws (p/n P-0281)
• Threading Tool with Handle
• Three Guide Bushings (1/4″, 3/8″, 9/16″)
• Three Threading Dies (1/4″, 3/8″, 9/16″)
• Laminated Instruction SheetParker Autoclave Engineers both Medium and High Pressure coning and threading tool kits. Each kit consists of the required tools and other items necessary for your coning and threading needs. All kit items are placed in a hand-carry tool case with top tray.
Medium Pressure Kit (p/n KMCT-MT)
MCT Coning Tool and:
• 1/4, 3/8 and 9/16″ collets
• 1/4, 3/8 and 9/16″ blades
• (9/16” blades for 20,000 psi tubing only)402 Threading Die Holder Tool and:
• 1/4, 3/8 and 9/16″ guide bushing
• 1/4, 3/8 and 9/16″ diesOptions:
KMCT-MTR Kit includes Reservoir Assembly (see page 4)
KMCT-MTS Kit includes Support Arm AssemblyKMCT-MTRS Kit includes both Reservoir and Support
Arm AssembliesHigh Pressure Kit (p/n KMCT-HT)
MCT Coning Tool and:
• 1/4, 3/8 and 9/16″ collets
• 1/4, 3/8 and 9/16″ blades
• (9/16” blades for 60,000 psi tubing only)
402 Threading Die Holder Tool and:
• 1/4, 3/8 and 9/16″ guide bushing
• 1/4, 3/8 and 9/16″ diesOptions:
Manufacturers Information
KMCT-HTR Kit includes Reservoir Assembly (see page 5)
KMCT-HTS Kit includes Support Arm Assembly
(see page 5)
KMCT-HTRS Kit includes both Reservoir and Support
Arm Assemblies