For more information on Parker products or KC Controls services please call 01293 538940, or fill out the form below and a member of our team will be in touch. More...
Sale!
UHP Metal Face Seal and Weld Fittings
£800.00
- Compact Design allows for system miniaturization and close coupled spacing
- Material traceability via permanently marked heat codes on each wetted component
- Permanent product designation identifies manufacturer, material and internal finish when applicable
- Enhanced female nut silver plating promotes consistent easy assembly
- Controlled wetted surfaces meet stringent ultra-high purity system requirements by preventing outgassing and inhibiting corrosion
- Patented Torqtite™ gasket promotes sealing of damaged toroids and virtually eliminates assembly loosening due to vibration or thermo-cycling
Related products
-
Sale!
P Series Fittings and Nipples
£800.00Parker Autoclave Engineers use high quality UNS S31600/S31603 316/316L material cold worked to our stringent specifications that enable certification of NPT style Instrument Pipe Fittings to a maximum working pressure of 15,000 psi (1050 bar). It’s the strength of the material that allows this superior pressure rating and care should be taken to only use with other similar fittings made to the same specification.
-
Sale!
Low Pressure Speedbite
£800.00Parker Autoclave Engineers Low Pressure “Speedbite” and “Mini” Series fittings are designed to work with 10V/SW Series and Mini Series Low Pressure Valves as well as Low Pressure Tubing made of commercially sized 316/316L SS in the “Annealed” condition. Pressures to 15,000 psi and sizes from 1/16″ to 1/2″ are readily available.
The Speedbite connection is a single-ferrule bite-type compression fitting engineered for use with tubing designed by Parker Autoclave Engineers to a controlled hardness. Speedbite fittings employ a bite-type compression style single ferrule that is manually tightened.
-
Sale!
Pargrip PFA Fittings
£800.00The Parflare Fittings are ideally suited for any ultrapure or corrosive chemical application. The fitting design yields a leak tight connection with minimal dead volume and can be used in side loading and vibrational applications. The connection is achieved by a heated flaring process utilizing an external heat source (HG Heat Gun) and PTFE mandrel (MFT Manual Flaring Tool), or by using Partek’s optional FG Series Electronic Flare Gun. Parflare PFA fittings are supplied with PVDF nuts as standard. For PFA nuts add -T suffix to part number. For High Temperature nut assemblies add -HT suffix to part number (1/4” – 1” sizes only).
- Perfect for applications where ease of assembly is a requirement
- Grooved tubing is not required
Talk To Us Today
Speak to an expert within seconds about our extensive range of products and services.
