For more information on Parker products or KC Controls services please call 01293 538940, or fill out the form below and a member of our team will be in touch. More...
Sale!
CPI Fittings
£800.00
- Three piece simple design to work on all instrumentation grade tubing
- Superior body seat surface finish to seal gases and liquids
- Molybdenum Disulfide coated nuts to prevent galling to provide lubrication
- Single ferrule technology to provide excellent anti-vibration performance
- Single ferrule system treated with Suparcase technology to insure sealing
- Excellent in high thermo cycling applications
Other related products...
-
Sale!
Tube Clamps
£800.00- Suitable for general hydraulic applications.
- The function of tube clamps is the fixing of straight tubes, bent tubes and hoses, the broad product range of Parker tube clamps helps to find a solution for all requests and therefore extends the range of applications.
- Their notable features are re-set capability, high tensile strength, very high abrasion resistance and excellent resistance to cold.
- This range of features enlarges the number of possible applications and stretches the life-cycle of tube clamps.
-
Sale!
Commercial Grade Tubing
£800.00Commercial Grade Tubing, various materials from European Sourced Mills, please contact us for sizes and availability
-
Sale!
Tube Bender
£800.00- High quality bending performance on stainless steel, and other hard tubing such as steel and titanium.
- Two stage design allows for in-place bending from 90° to 180° without ever crossing handles. Lock/unlock with a half turn rotation of the bending handle.
- Extra-long 16” (40 cm) handles increase leverage and roll dies in the bending form reduce force needed.
- Vice clamp built into bending form for extra stability
Related products
-
Sale!
Pargrip PFA Fittings
£800.00The Parflare Fittings are ideally suited for any ultrapure or corrosive chemical application. The fitting design yields a leak tight connection with minimal dead volume and can be used in side loading and vibrational applications. The connection is achieved by a heated flaring process utilizing an external heat source (HG Heat Gun) and PTFE mandrel (MFT Manual Flaring Tool), or by using Partek’s optional FG Series Electronic Flare Gun. Parflare PFA fittings are supplied with PVDF nuts as standard. For PFA nuts add -T suffix to part number. For High Temperature nut assemblies add -HT suffix to part number (1/4” – 1” sizes only).
- Perfect for applications where ease of assembly is a requirement
- Grooved tubing is not required
-
Sale!
Phastite
£800.00- Option for welded systems
- Simple assembly process provides high integrity connections, first time every time
- Installation time reduced to seconds
- No loose parts, supplied factory pre-assembled
- Permanent push fit tube connector with working pressures up to 20,000 psi (1380 bar)
-
Sale!
Low Pressure Speedbite
£800.00Parker Autoclave Engineers Low Pressure “Speedbite” and “Mini” Series fittings are designed to work with 10V/SW Series and Mini Series Low Pressure Valves as well as Low Pressure Tubing made of commercially sized 316/316L SS in the “Annealed” condition. Pressures to 15,000 psi and sizes from 1/16″ to 1/2″ are readily available.
The Speedbite connection is a single-ferrule bite-type compression fitting engineered for use with tubing designed by Parker Autoclave Engineers to a controlled hardness. Speedbite fittings employ a bite-type compression style single ferrule that is manually tightened.
Talk To Us Today
Speak to an expert within seconds about our extensive range of products and services.
